Utah Winter Adventure – Part II of III

It was a seriously cold morning when we woke up, the dog water bowls had frozen overnight and I found a surprise ice bowl sitting on my stove thanks to Andy. At some point, Brett’s kids had found a few random skeletons of long deceased animals and had relocated them next to their tent as a joke. Jacki seemed to find it particularly disturbing amusing. We had some laughs and enjoyed a nice leisurely morning, packing up and getting Brian settled in and updated on the trip.

Day 05: Coffee in Kanab and Breaking Down

The group decided to hit the town of Kanab again for some breakfast and coffee and get some tips from the local coffee shop/supply store: Willow Canyon Outdoor. It’s a pretty cool shop considering they had your essentials outdoor gear and also had a coffee shop with some very knowledgeable staff. We asked for their recommendation on potential routes and campsites on our route and they gave us a nice road in which we should hit on our way up to Capitol Reef NP.

(If you’re just catching up, part I of III can be found HERE )

After our short visit, we decided to run some last-minute stops before we hit the road. We hit Highway 89 eastbound and hunkered down for the haul to our offshoot to Cottonwood Canyon Road. We were on the highway with Cris at point and myself as tailgunner. Next thing I know every vehicle swerved to avoid something on the road, with Cris on comms stating he’s lost power steering. The convoy pulled off the road and Cris mentioning he had probably lost his power steering belt. Dodge problems. Being tail-gunner, I reversed to retrieve the belt but doing so, I didn’t notice the roadside reflector markers. One of them took out my passenger side mirror as I reversed but I was able to retrieve the belt successfully. The group gathered around Cris’s wounded Power Wagon as we began to troubleshoot the problem. After some pointing and grunting, we all agreed he needed a new truck idler pulley.

We were a little skeptical in terms of finding a part way out here but we did find an auto parts store in Kanab. It was just a matter of if they had it in stock or not. So Brian jumped in his Taco and jammed over to the store to find the part Cris needed to get his rig up and running again. In the meantime, the group made lunch and awaited Brian’s return. While waiting, I utilized some of Andy’s engineering tape to get my mirror back onto the Xterra. It was done in a very expedient and professional manner. About an hour later, Brian returned with the pulley in hand, and in a matter of minutes, we had the part installed and the Power Wagon roared back to life. We were back on the road.

We hit Cottonwood Canyon Road, which turns out is an entrance to the Grand Staircase-Escalante National Monument. It is a nicely graded road with some turnoffs that branch off into other fireroads into the canyon. It winds itself along the Paria River, and then transitions to wind along Cottonwood Creek.

 

It was along Cottonwood Creek in which we found a perfect campsite: lots of tree cover, lots of flat clear ground, and right next to a creek. We arrived in the afternoon, with enough time to setup and relax before the sun began to set. We relaxed the remainder of the day until night fell and we hit the sack.

Day 06

Making Time To Make The Ferry

The next morning as we’re packing up and getting ready to roll out, we get an early morning buzz by two F-35’s slicing through the canyon at low altitude. Quite the sight and a deafening roar as they screamed by.

Today’s route involved continuing up Cottonwood Canyon Road northbound all the way to Cannonville. The road was well-maintained, quite scenic, and a blast to drive on. We did stop at a turnout to regroup as the convoy began to separate over the long distance of fireroads. There we snapped some photos, Jaxx found a leg of a deer to chew on, we got some stretching in, and then hit the road to Cannonville, where we’d air-up and hit the pavement. Once aired up, the group pointed east and took Highway 12 all the way north to Capitol Reef NP.

Highway 12 is quite the scenic drive, with gains and drops in elevation, but mostly, the views do not disappoint even though we were on pavement the entire time. As we traveled along, we hit Escalante and decided to do a logistics and lunch stop. We filled up our gas tanks, restocked our fridges and coolers, made some lunch and then decided what our route would be taking from there.

Our dilemma was that we had a specific time to be at the ferry crossing from Bullfrog to Halls Crossing and we needed to figure out a route that would get us to that location. We opted for additional travel and exploration, so we picked a route that shot us straight up to Capitol Reef NP on hardball, and then shoot south on the Norton Bullfrog Basin Road, camp somewhere along the road, and then the following morning continue the rest of the way down to Bullfrog to catch our ferry.

After a few quick stops to take in the beautiful scenery along the road, we barreled down on Capitol Reef NP and we decided to check out Goosenecks Overlook where the Sulphur Creek zig-zags along the canyon. It was nearing sunset as we took in this awesome point. The way the sun hit the canyon walls, displaying dynamic shadows really made for a stunning sight. A few of the group had split off to the Visitor Center just down the road to snag some patches and swag. We regrouped on Highway 24 and continued on to Norton Bullfrog Basin Road.

The sun was almost set as we hit the dirt. I had stopped at Orientation Pullout at the intersection of the Norton Bullfrog Basin Road to snap a few shots. The group continued on as we’d be on that road for quite a while, but I had taken a few stops for photo ops as the sun set and became distanced from the group. I booked it down the well maintained and very wide dirt road to catch up. With all my LED lights on, it was easy blasting down the dark, chilly 25 degree road solo. It wasn’t until the main group had stopped to find a campsite that I finally caught up. At this point it was already dark and we needed to find camp as soon as possible. The group had decided to find a spot at an offshoot to Halls Overlook. It was a nice flat spot with 180 degree cover with small rocky hills. With the tents set up, fire going, dinner cooked and eaten, we then enjoyed the full moon and slight cloud covered night until we turned in for the night.

Day 07

Ferry to the Moki and Camping Among the Gods

Another beautiful sunrise greeted the rested convoy as we got coffee and breakfast rolling. I had gotten up a bit earlier to do my usual roaming and sniping around the campsite. The views and lighting from the rising sun with the slight cloud cover were amazing. With the group up and ready to roll, we convened to decide the days’ route and schedule since we had a ferry to catch. There was some time to spare and also some spectacular places to visit before we found out campsite for the night.

We hit the dirt yet again, but before we made the haul to the ferry, we stopped at Halls Creek Overlook to take in the sights. It was a very deep canyon in which a dried riverbed passes through, but held a dramatic view of what was literally right over the next ridgeline from where we camped the previous night. Saddling up, we hit the dirt again towards Highway 276 south to Bullfrog.

The convoy arrived at the Charles Hall Ferry crossing with some time to spare. We staged up at the slipway and awaited the ferry to arrive to pick us up. Once the ferry arrived, we loaded up and enjoyed the short ferry ride to Halls Crossing. It was a pretty cool experience since we literally had the ferry all to ourselves.

Once the ferry deposited us on the other side of the shore, we continued on Highway 276 to Highway 95 East. Stuart had brought up that he’d really like to drive the Moki Dugway, and being that I’ve never been on it, nor had others of the group had, we voted to take this route instead of remaining on pure highway. Our consensus of the night’s campsite was Valley of the Gods, so we hit Highway 261 South to the Moki. It was an overall basic highway drive until we hit the entrance of the dirt road.

 

The Moki Dugway was constructed in 1958 and “is a staggering, graded dirt switchback road carved into the face of the cliff edge of Cedar Mesa. It consists of 3 miles of steep unpaved, but well graded switchbacks at 11%, which wind 1,200ft from Cedar Mesa to the valley floor near Valley of the Gods… The state of Utah recommends that only vehicles less than 28ft in length and 10,000 pounds in weight attempt to negotiate this steep, narrow, and winding road… The term ‘mokee’ is derived from the Spanish word Moqui, which was a general term used by the 18th century Spanish explorers and settlers in this region to describe the Pueblo Indians they encountered, and the vanished culture that had left behind the numerous ruins they discovered during their travels… The dugway was constructed in the 50’s to provide a way to haul ore from the Happy Jack Mine on Cedar Mesa to the mill in Halchita, near Mexican Hat.” (www.dangerousroads.org). Checking weather on or before hitting the Dugway is highly recommended as conditions may be treacherous.

It was a beautiful day and had been so for the week, so we had no worries traversing the Dugway. The sheer cliff right along the roadside was quite intimidating but with the width of the road being a bit generous, and with light traffic in both directions, it was a breeze. We were worried about Cris’s Dodge Yacht Wagon but of course he showed us how to drive properly in such a large vehicle without dying.

The convoy rallied at the base of the Dugway, just at the entrance to the Valley of the Gods. The sun was beginning to set as we entered the Valley so we decided to find a place along the dirt road to call it for the day. We found a perfect site just off the main road with rock monuments entirely surrounding us. We were definitely in quite a spot and picked up quickly why this place has such a name. As usual, we setup quickly and hunkered down for the night.

 Continued in Part III HERE

 

 

[/vc_column_text][/vc_column][/vc_row]

Project Tundra // Winter (Pre-OXW) Update

RXT Rear Suspension

Late last fall, Project Tundra received a pre-production set of ICON Vehicle Dynamics RXT rear suspension – and the change these RXT parts made to the vehicle’s performance was profound.  The RXT system is made up of a user-configurable, Icon leaf spring pack that replaces the OEM Toyota leaf pack. Also included are Tundra specific shocks with increased travel, and a hydraulic bump stop kit.  Taken as a whole, these parts all work together to make your rear suspension next level.  Project Tundra already has the hydraulic bump stop kit, but adding the RXT leafs and shocks made a huge difference in the way the truck performs.  The best part about the RXT kit is that it can be configured to your specific truck and the amount of additional weight you have in your truck bed, so the end result is a system that will deliver much better performance than a one size fits all solution.  Here’s how it all works.

The RXT leafs for the Toyota Tundra can be configured in three ways all depending on how much additional weight is over your truck’s rear axle, or how much lift you want.  The leaf pack comes configured from ICON to handle an additional 250 pounds of payload while providing about 1.75 inches of additional lift.  If you swap out the third leaf in the RXT leaf pack with the provided additonal leaf, the pack will handle an additional 500 pounds of payload and add 3 inches of lift.  Finally, adding the additional leaf to the pack will provide 750 pounds of carrying capacity and add 4 inches of lift to the rear of an unladen Tundra.

I opted for the + 500 pounds option on Project Tundra, as two dirtbikes or our typical gear loadouts with the truck cap and roof rack come in around this mark.

Installing the leaf packs is easily done in the driveway on an afternoon with basic tools and an extra set of hands.  The first thing you’ll need to do is choose what configuration you want the leaf pack in, and then make any desired changes prior to mounting to the vehicle  A couple of C-Clamps will help you keep the packs from disassembling themselves when you loosen the locating bolt, and otherwise the process is well covered in the instructions.  With the packs configured as desired, lift up the back of the truck SAFELY and swap the packs out.

The other part of the RXT equation are the shocks which provide additional stroke over the 2.5 VS CDCV units that we’ve been using.  ICON offers three levels of shocks, named with their Stage-Number convention.  Stage 1 shocks offer vehicle specific valving, Stage 2 adds the CDC Valve, and Stage 3 adds Omega-level shocks that feature rebound and compression damping.  All RXT kits include the hydraulic bump stop Kit – another system we’ve absolutely loved having on Project Tundra.

As I mentioned in the last article, the performance difference realized by installing the IVD suspension on Project Tundra was huge, so the bar was already set quite high when the RXT parts arrived.  The RXT suspension makes a night and day difference over stock leafs or even an add-a-leaf – especially when you’re carrying any kind of weight.

Speaking of the Icon 2.5 VS CDCV shocks I took off the vehicle, I’m happy to report that after a year of use all over the Southwest the shocks are still in great shape and still fully functional.  Yes, there is pitting on the lower shock mounts and the aluminum bodies aren’t as shiny as new, but this wear has been earned from logging thousands of miles bombing around off-road and on wintry roads.  It turns out flying rocks are an equal opportunity destroyer, so I don’t care whose shock you have – pitting and aluminum oxidation are going to happen.  What counts is that all of the ICON shock shafts look great, and all of the seals are holding tight – so these shocks still have plenty of life left in them before they get rebuilt.

The RXT suspension has handled every type of terrain I’ve pointed it at so far with performance that’s perfectly matched to the front end, which is to say that the back end has now been turned up to match the front end.  The ability to set the leaf pack up for your specific vehicle depending on what you do with your truck and how much weight you carry combined with the damping adjustment from the CDCV and Omega level shocks make the RXT system the choice for Tundra rear suspension.

 

 

LINE-X

Spray-In truck bed liners are hands down the best way to project your truckbed from sharp tools, ski edges, car parts, the occasional steel-fab project, and everything else life throws at your truck bed.  The problem is that the OEM spray in liners leave a lot to be desired, which is why I took a trip to San Diego before SoCal Desert Rendezvous to make an appointment at Line-X of San Diego.

At Line-X of San Diego, Dallas and Chris applied their years of experience in truck bed coatings to come up with in a spray in bedliner application for Project Tundra that was exactly what I was looking for.  In addition to protecting the sheet metal, I wanted to do a few custom things that would make the bed of project Tundra better suited to my needs.  First up, I pulled off the stupid plastic caps that run around the bed rails of the truck.  These pointless pieces of plastic exist only to trap dirt and dust, and when sandwiched with a load (like a truck cap) become plastic backed sandpaper that wears on your paint and in no time at all, starts wearing on bare metal.  Taking the plastic caps off also allowed Dallas and Chris to do a true over the rail bedliner, providing extra protection to the bedsides from the truck cap and from me when I’m loading heavy things over the sides of the truck bed.

With all of the holes in the bed rails covered, we then turned our attention to sealing up all of the drain holes in the truck bed to make the thing as dust proof as possible.

Line-X is also a great thing to spray on your truck’s rocker panels to protect them from rocks and other road debris that are constantly tossed up by your tires.  I sprayed the rocker panels on my Tacoma, and it’s held up great to hundreds of thousands of miles of dirt and rocks.  Again Dallas and Chris applied their expert hands and took the time to remove the plastic wheel well trim so that they could tuck the Line-X under the plastic bits once installed – a detail that will only serve to help lengthen the lifespan of Project Tundra’s sheet metal.

Chris and Dallas devoted an entire day to applying Line-X to Project Tundra, and the results of their attention to detail and skill speak for themselves.  Project Tundra’s bed and rocker panels are now armored-up to handle hundreds of thousands of miles of dirt and rock, and all of the gear hauling I can throw in the truck bed.

ABOUT THOSE HUB CAPS

I’ve had a couple of the hub caps on my ICON Alloys Six Speed wheels break, and when I called Icon to asking about buying new hub caps, I was really happy to hear that they’ve redesigned the caps to fix this very issue.  The new hub caps are screwed together (the old design was a snap-fit) and I do not expect to see any failure or issues from this new design.  I need to give ICON props for revising and continuously improving their products, rather than simply selling more copies of an imperfect design.

LET THERE BE LIGHT

Yes, Project Tundra will be getting fully armored – but as with any good thing, it takes some time.  So in the mean time I’ve been working with Pelfreybilt Offroad to design brackets for the Tundra’s A-Pillars and stock front bumper, so that I can add some light while I’m waiting for my armor to arrive.  With a bit of time spent in Solidworks, I’ve developed A-Pillar brackets for the Tundra that will hold an XL 80, as well as brackets that will allow me to run a Baja Designs 30” S8 light bar in the stock bumper.

Project Tundra will be receiving it’s armor soon, so I’ll leave this update with a photo I took of what’s to come.  Stop by and see us at the American Adventurist booth at Overland Expo West (PS1) and say hi!

Full disclosure:  ICON Vehicle Dynamics provided the RXT suspension for review and testing purposes at no cost to Chad de Alva or American Adventurist.  Line-X of San Diego installed their products free of charge.