HiLift slider adapter?

[Sean Slavin]

I need a new slider adapter for my HiLift. I can't remember what I had with the FJ so I've been digging around. Sierra Expeditions has one. Then found this one and this one. Came across WabFab on the FJ Cruiser Forums but no one seems too happy with their service.

Any recommendations?

 

[BlkWgn]

I use the JakJaw from Trasharoo. It has worked well for me, and the price is pretty reasonable https://trasharoo.3dcartstores.com/JakJaw-Recovery-Tool_p_50.html?affid=0&referrer=rss

 

[Sean Slavin]

I use the JakJaw from Trasharoo.

Same one that's over at Sierra. Thanks for the input.

 

[brentbba]

No clue as to current service from WabFab. I purchased mine from them when they first produced them. That was years ago.

 

[woodienut]

I can't say enough about Bogert Safe Jacks products...https://safejacks.com/collections/hi-lift-jack-accessories

Personally I leave the farm jack at home and got this...https://safejacks.com/collections/bottle-jack-accessories

Anyone interested in a used Farm Jack pm me... $40.00

 

[Chazz Layne]

Same one that's over at Sierra. Thanks for the input.

If you want a JakJaw let me know. I have a brand new one you can have for free. I have no use for it because...

I prefer sliders that have built-in notches for a Hi-Lift.

 

[Sean Slavin]

If you want a JakJaw let me know. I have a brand new one you can have for free.

Seriously? Done deal. I'll take it. Thanks.

 

[Chazz Layne]

Seriously? Done deal. I'll take it. Thanks.

Message me an address and I'll get it shipped out next time I'm in town.

 

[Sean Slavin]

Just left you an email. Thanks again.

 

[Dave]

I also use the JakJaw. I use a 1x1 ft piece of 1/2 inch thick rubber with it to keep it from sliding or scraping off the powder coat on the slider as well.

 

[Sean Slavin]

I also use the JakJaw. I use a 1x1 ft piece of 1/2 inch thick rubber with it to keep it from sliding or scraping off the powder coat on the slider as well.

That's a great idea. I'm going to have to run over to the hardware store and find a piece of that.

 

[Dave]

That's a great idea. I'm going to have to run over to the hardware store and find a piece of that.