2018 Sprinter 4x4 144"...Take 2

Well, place is super duper trashed. Like as bad as africa trashed.
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr

Helped clear out pathway blocking debris for a few people, driveways, trees blocking streets. Pretty sure both of our winch lines are toast, Mine has some pretty slick spots in it now. But worth it i think.
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
IMG_9554 by Grant Wilson, on Flickr

Saw a revel, insurance adjuster guy
IMG_9552 by Grant Wilson, on Flickr

Saw this stupid thing
IMG_9550 by Grant Wilson, on Flickr

And got to hang out with my good friend Rob who was a good sport and came with me (yes thats my old outback). Never work alone!
Untitled by Grant Wilson, on Flickr

and since someone asked in PM, figured id just share
44 tickets (wellness checks/supply dropoffs)
20 cases of water
30 baby wipe packets
2 cases of toilet paper
4 bottles of chainsaw fuel
3 Trees cleared from roads
3 Tires plugged
2 driveways cleared of debris
1 yard cleared
 
Last edited:
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Flat Front Rack Installation!
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
Van Go Outdoors Flat Rack by Grant Wilson, on Flickr
 
Halrighty.

Everything is all back together. I wanted to do one last coat of white on the drawers since they werent perfect, but you know what...I'm ok with this for now.
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr

Over the weekend, I went back up west to Panama City since it was the last open weekend i had. Cleared a bunch of trees and a ton of supply deliveries, handed out 200 plates of food, and delivered a load of insulin. All and all, productive
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Cut this big ass tree down with a lil Stihl MS180C. did a fantastic job. Really need to step up to the next size motor tho
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
This tree was on an elderly couples' well pump/pressure tank. We shored it up, trimmed it down, then used the winch to pull it over away from the tank, then cut the trunk to let it stay in place. Effective use of recovery gear!
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
relief-7 by Grant Wilson, on Flickr
relief-8 by Grant Wilson, on Flickr
relief by Grant Wilson, on Flickr

And to finish out the weekend....beach time! (ok just gratuitous glamour shots)
beach by Grant Wilson, on Flickr
beach-12 by Grant Wilson, on Flickr
beach-10 by Grant Wilson, on Flickr
beach-5 by Grant Wilson, on Flickr
 
Lotsa fun!
With overland expo east coming up. I have been doing a TON of last minute things.
Yesterday and today:
Installed the final version rack, panels, rear lightbar, and wired it all up (still waiting on frontlightbar mount to be powdered. should be done monday)
Made bracket for hitch plug
Trimmed the rear and sides of the van interior covering gaps
Installed b pillar trims
Cleaned all the ceiling and cabinets
Installed rear add a leaf kit and from sumo springs
Fabricated a stainless grab handle
Fabricated a mount for the rear door for the Kinsman shower
Installed said shower


tomorrow I have to install the Espar D2 heater, so Im not cold at expo. Lord knows its not overlanding if you are cold.

Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
 
OK!
(i say that alot i know)
BIGger things in the world are in the works.
catching up from a week or two ago to now:
Installed the Espar D2 from Heatso.com (use code sprincentvango for something off there)
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr

Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
loaded and stickered up
Untitled by Grant Wilson, on Flickr
met up with some bros for pre camping festivities
Untitled by Grant Wilson, on Flickr
literally fuck the cold
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr

Got back and busted out half a dozen Kinsmen Shower mounts for sprinters. If they sell, sweet, if not, it was good practice. win WIn!
Untitled by Grant Wilson, on Flickr

Then decided i wanted to make a flag pole mount
So i did
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Concept and execution is perfect. However, the appearance isn't....elegant. so I will readdress it and see. Using this week to set up the garage fab shop, which leads me to!
Screen Shot 2018-11-17 at 9.16.41 PM by Grant Wilson, on Flickr
Bit the bullet and decided to invest a large chunk of money into my home shop. This plus a large order of other gear (bandsaw, sander, grinders, other tools etc) should be here wednesday
And that brings me back to current!
This weekend we are at the Florida Tiny House festival hanging out with a bunch of other van peoples!
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
Untitled by Grant Wilson, on Flickr
 
grantwilson said:
The RnD guy and I are on a first name basis. POSSIBLY cool things coming to the Revel via my shop.
Click to expand...

Sweet!

I made the suggestion that follow the same sales model of Toyota's aftermarket TRD products. Let the dealer install at their facility. e.g. the VanGo lift. The suggestion is self serving because the Revel is probably going to be my next purchase.
 
You must log in or register to reply here.
Back
Top Bottom