Hard mounting a Partners Steel stove question

[donmontalvo]

I asked Goose Gear what's the best way to secure my Partners Steel 22" stove onto my new Goose Gear Camp Kitchen stove slider.

I was told most people bolt the stove down. I'm willing to do that. But I'm concerned aobut leaks.

If anyone is bolting down their stove, what are you using to prevent grease, water, etc., from leaking?

 

[Greg]

Something like these should work.

https://www.mcmaster.com/sealing-washers

 

[Tim R.]

Something like these should work.

https://www.mcmaster.com/sealing-washers

Agreed Greg. You read my mind.

 

[WashingtonTaco]

I had mine bolted down when I still had my Taco. Wasn't very much of an issue. Try to level the truck best you can when you park. That being said it'll still lean or tilt or both.

 

[Greg]

If you want to be able to easily remove the stove for cleaning and assuming the mounting surface is hardwood.

Threaded inserts for hardwood
https://www.mcmaster.com/threaded-inserts/for-use-in~hardwood/brass-tapping-inserts-for-hardwood/

Threaded-Stud Knobs
https://www.mcmaster.com/knobs/mount-type~threaded-stud/threaded-stud-knobs-6/