Hand pump for RotoPax

Brett C

Brett C

Adventurist
Senior Staff
Moderator
So I'm doing a little research and I've seen the great hand pumps several of you have for your specter cans but I haven't seen anyone do it for the RotoPax. I'm exploring my options before choosing a path. So looking for input or links of such setups you guys may have seen that my googlefu has missed.


Sent from my iPhone using Tapatalk
 
Will it? I thought the RotoPax spouts were fairly small.


Sent from my iPhone using Tapatalk
 
It was like a 3/4 or 1 inch hole IIRC. You'd need an extra lid assembly most likely but it might work. How big is a lid on a Rotopax?
 
It will work if you fab a secondary flat pc for the cap/seal that is under the screw portion., that being said the angle may present issues? I found when I bought my pump form West marine that ordering on line saves money rather than visiting physical store go figure. I can send you some pics if you pm me
 
woody said:
It will work if you fab a secondary flat pc for the cap/seal that is under the screw portion., that being said the angle may present issues? I found when I bought my pump form West marine that ordering on line saves money rather than visiting physical store go figure. I can send you some pics if you pm me
Click to expand...
You could probably attach a piece of tubing to the receiving end of the pump to get down into the bottom of the container....
 
Yep that parts the easy part,I was referring to angle of spout. I mounted mine on a Scepter and just cut about an inch off the end of the spout. Will post pics this afternoon
 
Not to mention Beau has been having a devil of time securing parts to assemble complete systems - the UK made pumps are becoming hard to get.
 
Mmmmmmaybe!?

I had (have)the scepter can version until I made the 12 gal tank that has the same workings.
 
You must log in or register to reply here.
Back
Top Bottom