ArkansasDon
Adventurist
I got this idea from a you tube video. I used a welding blanket & added a digital thermometer, where the guy used carbon felt & no upgrade on the thermometer.
These little stoves are a good but at times difficult to hold temperature or being efficient & the thermometer gauge isn't accurate. By adding the digital thermometer & the welding blanket cut to fit the stove (which is good up to 1400 degrees) the oven should be more efficient to hold heat & the digital thermometer would make the temperature inside the oven more accurate. I trimmed off the bottom portion about a inch from the bottom on 3 sides.
I made a template 1st then cut it so I can fold it up when not in use. It drapes over the stove on 3 sides, the back, & both sides. I cut a slit so the handle will come threw.
These little stoves are a good but at times difficult to hold temperature or being efficient & the thermometer gauge isn't accurate. By adding the digital thermometer & the welding blanket cut to fit the stove (which is good up to 1400 degrees) the oven should be more efficient to hold heat & the digital thermometer would make the temperature inside the oven more accurate. I trimmed off the bottom portion about a inch from the bottom on 3 sides.
I made a template 1st then cut it so I can fold it up when not in use. It drapes over the stove on 3 sides, the back, & both sides. I cut a slit so the handle will come threw.
