Bailey's 2010 Tundra - Adventure Build (w/ Trip Photos)

Part 2 of the interior layout is done! Added some storage under the platform. Chairs don't fit perfectly but it's as close as it'll get. Much more organized now
smile.png


47232228712_a7dc9024cb_h.jpg
 
A few more pics from Anza Borrego

32547050977_08ae953c44_b.jpg


32547050377_51368396d6_b.jpg


32547049487_f87c310434_b.jpg

Ozzy loves his camper ^

32547048877_7837c4a9f1_b.jpg


32547047497_4533e662d1_b.jpg


46573699315_0a39c989cb_b.jpg


47436079742_eef3387f0e_b.jpg


Looks like this will be my last trip to Anza until the end of 2019 or possibly early 2020. The weather is getting warm and my travels call for me to head out of SoCal and slowly make my way back to CO
 
Adding some exterior lighting to the Truck & Camper. A pair of Baja Designs S2 Sports in Work/Scene will go on the exterior sides of the camper and the S2 Sport Flush Mounts are replacing my existing lights in the rear bumper. Note: Might change the lenses to Amber. Going to wait and see how everything looks first

I'm going to try and install everything this weekend. The plan is to wire all 4 lights using my switch pros and have activation via in-cab switch or my phone.

 
After 6 months of running a Four Wheel Camper on my Toyota Tundra, it's time for more organized storage. I ran a Goose Gear system in my FJ Cruiser and was very happy. I decided to reach out to them to see if they had an interest in developing a system for the Toyota Tundra CrewMax (07-13).

While chatting with Goose Gear, Brian determined it would be best to offer 3 options for customers. A 40% delete, 60% delete, or the option to delete all 100%. This allows you to run a drawer on the passenger side, driver side, or a drawer on both sides.

He took some measurements and did his magic on the computer. It was impressive to see the computer design come to life on the CNC machine:


A few pics of the prototypes:
40% Delete




60% Delete




100% Delete



Production models will be coated in bullet liner and the access cubbies will be fully assembled with latches.

I plan to delete the entire back seat and run 2-22" wide drawers (one on each side). This will allow me to store my jumper cables, tools, bike gear, and more. The dog will have a bed on top of the drawer so he can be comfortable on our adventures.

I'll post more pictures as progress is made on the seat delete and drawers. At this time, I don't have any clue when GG will release production models. They are just starting this project :)
 
Last edited:
Had a few things I needed to fix before we could finish the Goose Gear Rear Seat Delete

One of them was covering the hole that was behind the rear seat. The previous owner of this truck had quite a few radios mounted to a custom panel behind the seat. I ended up removing the panel and covering the hole.

47969326652_b4f8ddeb17_b.jpg

47969344073_4f86f304a2_b.jpg


I added an MSA 4x4 small organizer from Adventure Imports, my Adventure Medical Kit, and a few random patches. Happy with how this turned out

Now it's time to make more progress on the seat delete
 
Back
Top Bottom