...And if it's only one side and it rocks fine back and forth, switch sides and save some cash. I would just look for the cheapest KEDU branded HY52 available. Amazon sells two for $30.
So simple. I jumper'd the 2 white wires and moved the black wires to the white side of the switch and it works fine. LOL. I already ordered the amazon switches. Let me known if you can use extra switch. I'll send it to you. Thanks for the help
You're good as long as your gear doesn't exceed the amp rating of that switch. Engineering uses the 80% rule for specs. The load should be at 80% (or less) of the rating for whatever switch is being used, so you have a good margin there.
The switch suddenly going bad after owning a piece of equipment very long is probably more a function of time, corrosion, etc vs failure from a short circuit. As long as nothing is getting warm/hot it will probably be fine.