Goose Gear Drawer System

AutoRotate

AutoRotate

Adventurist
Good afternoon,

Preparing for a dual 6 inch GooseGear drawer system installation. I have prepped the area and also finished wiring in two dedicated 12v plugs to a Blue Sea fuse block wired to AUX battery. I'll post some more pictures when the drawers arrive.

1%2B%2528Large%2529.JPG

Factory Rear Sliding Cargo Tray Removed

15%2B%2528Large%2529.JPG

Two 12v Plugs Installed Below Factory Plugs

12%2B%2528Large%2529.JPG


14%2B%2528Large%2529.JPG

Plan to Find a Better Ground when More Accessories are Added

17.JPG

Decided to Try This in Place of Dynamat Due to Cost

18%2B%2528Large%2529.JPG

One Roll Covered Rear Cargo Floor Evenly

​
 
Last edited:
That peal and seal stuff works great. Did a buddy's Camero in college with that stuff. I actually plan on doing the inside of my trailer with that stuff when I am done with my trip this month. Just didn't have the time/money/desire to mess with it before.
 
Good afternoon,

I removed the factory sliding rear cargo tray from my truck and installed the GooseGear plate system, along with their two drawer module. I needed mine short (overall 6 inch height) as I have my dog with me often. The experience was fantastic, excellent customer service, and solid product. Here are some pictures.

18%2B%2528Large%2529.JPG

Removed everything down to the bare metal floor and installed a barrier from Lowe's.

17.JPG

This is the barrier product I used as I didn't want to spend the money on Dynamat

6%2B%2528Large%2529.JPG

Added some full time rear 12V rear outlets and Blue Sea Wired to AUX battery while I was there

IMG_5139.jpeg

Shipment arrived VERY well packaged and protected

IMG_5141%2B%25281%2529.jpeg


IMG_5142%2B%25281%2529.jpeg

GooseGear Plate System installed

IMG_5145%2B%25281%2529.jpeg

Close up of drawer slides

IMG_5146%2B%25281%2529.jpeg


IMG_5147%2B%25281%2529.jpeg


IMG_5148%2B%25281%2529.jpeg


IMG_5149.jpeg


IMG_5150%2B%25281%2529.jpeg


IMG_5151%2B%25281%2529.jpeg


IMG_5152%2B%25281%2529.jpeg


IMG_5153.jpeg


IMG_5155.jpeg


Very pleased with end result.
 
Took some more pictures

IMG_5185.jpeg

Left rear seat folded down, looking at back side of GG system and my dog crate

IMG_5186.jpeg

Similar view, showing height difference between my drawer system and the folded left rear seat back

IMG_5187.jpeg

Distance between drawer system and plastic wheel well interior

IMG_5188.jpeg

Space created immediately behind second row seats. GG plate system and drawer system

IMG_5189.jpeg

Looking down at space created behind second row of seats. Looking down at GG plate system and portion of the drawer system

IMG_5190.jpeg

Measurement of "exposed" plate system not utilized by drawer system due to slanted second row seat backs

IMG_5191.jpeg

Measured distance between drawer system and interior plastic wheel well
 
You must log in or register to reply here.
Back
Top Bottom