Another project I finally got completed was a rear view camera setup. I found this cool touch screen mirror setup on Amazon and thought this would be a nice way to setup the M1010. It straps to the vehicle mirror (I happened to have a spare windshield mounted mirror in my parts) and you run wiring for power, GPS and the camera. This is a cool unit that not only has the rear camera but a built in dash cam. You can even split screen it. You put in a Micro SD card so it will record while driving as well. I bought the hard wire power adapter (comes with a cigarette plug standard) and the extra long camera cable (original one works great for a car but not a long bed type truck). I ran all the wires and since there is no headliner to hide the wires in, I used woven mesh split loom and put all the wires into that. Then I used wire clamps that I riveted to the header, running the wires along the windshield gasket, then ran down the A-pillar into the dash. I also made a bracket to mount the camera on, that mounts to the rear bumper where I removed the trailer plug that had been installed previously, that I am not using. This works great and it is nice to see what is behind me, especially when backing up.
View attachment 51163
View attachment 51164
View attachment 51165
View attachment 51166