That looks so much nicer! Honestly, the red dash was the biggest turn-off for me, since I can't stand the color in a vehicle. It's nice to see that it's easily (ish) repainted.
Just like Tamiya models on a much larger scale.Honestly, it really wasn’t that hard to do. Basic dash disassembly, basic painting prep and masking. The hard part was waiting for it to dry enough for reassembly.
Time for @Timbren-Industries Active Offroad Bump Stops.
View attachment 53255
I’ve used these before so it was a no brainer to add these to the Gladiator.
Puny OEM bumps meet beefy Timbrens. These come with a spacer if you’re running a taller lift but I am not using it.
View attachment 53254
View attachment 53252
View attachment 53250
View attachment 53251
View attachment 53253
Now to take care of those red thread accents.
Ya’ll have too much time on your hands
You're the one coloring stitching with a fine tip sharpie.
Coloring stitching? You have better odds at seeing the tooth fairy tonight.
Looking good Dave!
Ditch lights are complete. Baja Designs S2 Pro’s with Baja Designs A-Pillar mount kit, wired to the sPOD Bantam.
View attachment 51882
View attachment 51883
View attachment 51884
Dave, how did you do the custom labels for your HD controller?
I spent about 30 minutes fighting with the floor mat on my install with same bracket before I came back here and zoomed in to see you trimmed the front edge of the floor mat. Innovative JK Products should mention that in the instructions. Helpful post.OBA installed. Same mount I had on the JL, made by innovative JK products. Used the same home made 8 ga wiring harness I made for the JL. Fused at the battery.
View attachment 51468
Seat is all the way forward here
View attachment 51470
Seat in normal position all the way back, mat reinstalled.
View attachment 51474