Well after reading through the fog light thread on Tacoma World (after ordering my BD fogs....) I decided to get some SS3's. Long story short, the BD lights dont really meet SAE standards, and are much dimmer than the competition. So the Diode Dynamics SS3 Max's Much more road friendly than the BD, and way brighter.
Now the C4 bumper is not designed for the SS3's so it took a bit of doing.
First the mount will need to be modified to sit further towards the front of the light to hit the hole in the mount on the bumper.
Original plan, bracket that would go UNDER the C4 tab, bolt to the light bracket and tab. No dice. Holes are too close together, hits tab on bumper.
Plan B, weld that bitch together. Just use front hole. (its TIGHT, but still has adjustment on light)
In the powder coat oven now....
Toaster oven works great for little brackets getting powder coated.
And adapter harnesses made, get a weatherpack crimper if you don't have one, WAY better than needle nose etc. Even if they are the cheap ones.
And here we are SS3's in the C4 bumper. They fit the holes fine IMO
Brackets from the back.
And the money shot! DD right BD left (yes they are on, you can kinda see the yellow around the tire print)
DD is aimed a little lower, and has much tighter pattern. Ill get night shots at some point. Have another set to install on a different rig